I N S TA L L AT I O N I N S T R U C T I O N S
UNPACK THE WASHER
After the washer is in the home, remove the
1
carton and Styrofoam® shipping base from
the washer.
When removing the washer from the carton base,
be sure to remove the tub support in the middle
of the carton base.
If you must lay the washer down to remove the
base packaging materials, always protect the side
of the washer and lay it carefully on its side. Do
NOT lay the washer on its front or back.
Tub support
10
Carton Base
Remove the packing block containing the
2
owner's manual, parts, water hoses, and
laundry product samples.
Unfasten the power cord from the back of the
3
washer.
TOOLS YOU WILL NEED
• Adjustable Pliers
• Carpenter's Level