Cooper Security Scantronic 750r Guia De Instalacion página 10

Installation
At the control unit:
1. Enter installer mode.
2. Select "Other Devices".
3. Select "External Siren Menu".
4. Select "Add/Del Ext Siren".
The display shows a list of the positions available for
learning external sirens. If a " " icon appears at the end
of a line then that position is already assigned to an
external siren.
5. Use the scroll key to select the position you want to use,
and then press "Select".
The display shows "Activate Ext Siren Tamper".
6.
The control unit display shows "Siren Added Signal
Strength" and a number.
The number represents the signal strength of the radio
transmission from the siren, measured by the control
unit. For successful operation the number should be
higher than 3 when the siren is mounted in its final
position (see page 10).
7. Press "Back".
The display shows the list of external sirens. The siren
you have just made the control panel learn should now
show the " " icon.
Note: Do not leave installer mode until you have fitted the
siren in its final position.
Page 8
Activate the tamper arm on
the siren.
497291
750r