Ego Power+ LB6002E Manual De Instrucciones página 12

SPECIFICATIONS
EN
Voltage
Maximum Air Volume
Maximum Air Velocity
Maximum Blower Force
Recommended Operating
Temperature
Recommended Storage
Temperature
Approximate Run Time
(With EGO 5.0 Ah battery)
Blower Weight
(Without battery pack, with tube)
Measured sound power level L
Sound pressure level at
operator's ear L
PA
Guaranteed sound power
level L
WA
(according to 2000/14/EC)
Vibration a
h
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
PACKING LIST
PART NAME
Blower
Blower tube
Operator's manual
10
56 VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LB6000E
DESCRIPTION
KNOW YOUR BLOWER (Fig. A & B)
56 V
1. Handle
1020 m 3 /h
2. Battery-Release Button
232 km/h
3. Latch
19 N
4. Electric Contacts
5. Ejection Mechanism
-15°C-40°C
6. Air Inlet
-20°C-70°C 7. Front Tube (Curved Flat Tube)
8. Air Outlet
15 min (Boost)
9. Front Tube (Cylindrical Tube)
22 min (High speed)
10. Middle Tube
120 min (Low speed)
11. Control Handle
5.7 kg
12. Adjustable Support Harness
13. Blower-Tube Storage Knob
94.6 dB(A)
14. Boost Button
K=0.8 dB(A)
WA
15. Speed/Lock-on Dial
82 dB(A)
16. Air-speed Trigger
K=2.5 dB(A)
17. Wing Nut
18. Tube-Hanging Groove
95 dB(A)
understanding of the information on the tool and in this
0.522 m/s
2
instruction manual as well as knowledge of the project
K=1.5 m/s 2
you are attempting. Before use of this product, familiarize
yourself with all operating features and safety rules.
ASSEMBLY
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
or create accessories not recommended for use with this
blower. Any such alteration or modification is misuse and
could result in a hazardous condition leading to possible
serious personal injury.
QUANTITY
cause serious personal injury, always remove the battery
1
pack from the tool when assembling parts.
3
ASSEMBLING THE BLOWER TUBES
1
1. There are three tubes for the blower: two front tube (a
WARNING:
The safe use of this product requires an
WARNING:
If any parts are damaged or missing,
WARNING:
Do not attempt to modify this product
WARNING:
To prevent accidental starting that could
cylindrical tube & a curved flat tube) and a middle tube
(Fig. C).