Publicidad
Idiomas disponibles
Idiomas disponibles
7). If you want to skip the DTV tuning, press the MENU button to
interrupt the tuning half way. You will then go straight to
ATV tuning. You may repeat the above step if you also want to
skip the ATV tuning. An installation reminder will appear the
next time you turn on the TV,if no channel is found.
8). After tuning is complete, the channels are arranged in a
preset order. If you wish to skip channels, modify the preset
order or rename channels, select P rogramme Edit under
the channel menu.
All the channels including ATV, DTV and Radio
can be tuning by one time,if the Tune Type is
DTV+ATV .
All the stored channels will be disappear after
auto tuning .
After auto tuning , the channel will skip to
the first DTV channel.
2. 1 )DTV Manual Tuning (DVB-T)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu and then
press the OK button.
2). Press the
buttons to select DTV Manual Tuning
and then press the OK button, if you select Air in Auto
Scan, you will enter DVB-T manual scan menu.
Digital Scan
Channel
Start
Frequency
Picture
Strength
Audio
Clock
Setup
Lock
Return
MENU
3). The DTV Manual Tuning screen will pop up.
Press the
buttons to select the desired UHF channel
or press the OK button then input channel number. Select
Start to commence the search of that channel. When the
signal has been tuned, the picture and signal strength will
be displayed on the screen.
4). Press the MENU button to return back to the
main menu.
5). Press the EXIT button to exit the menu.
2. 2 )DTV Manual Tuning (DVB-C)
1). Press the MENU button and then press the
buttons to select the CHANNEL menu and then
press the OK button.If you select Cable in Auto scan,you
will enter DVB-C manual scan menu.
2).
P
/ks/s/Modulation), press OK to input Frequency and symbol,
press
the search of that channel. When the signal has been tuned,
the picture and signal strength will be displayed on the
screen.
3). Press the MENU button to return back to the
main menu.
4). Press the EXIT button to exit the menu.
Ch5
177.50 MHz
54
Move
OK
OK
4). Channel edit:
Press the
Channel Menu. Then press the OK Button to enter the sub-
Menu. Then you will need to select the channel you wish
to edit.
Frequency
Channel
Symbol Rate
Modulaton
Picture
Start
Audio
Clock
Setup
Lock
Return
MENU
The DVB-C Manual Tuning screen will pop up.
ress the
buttons to select(Frequency /Symbol
to change Modulation press Start to commence
3) ATV Manual tuning :
You can change the sound system to search theanalog TV
channels and fine tune the channels , then storage the
channels you selected.
ATV Manual Tuning
Save to 1
System BG
Current CH1
Search
Fine tune
Frequency 44.25 MHz
Return
Save
MENU
1. Press teletext red button to storage to channels
after manual tuning .
2. If the number save to is the same as the number
Current CH, when you press Red button,the save to
number will cover the Current CH number.
or
Buttons to select Channel Edit in the
Operation
474000K
6875K
Auto
Move
OK
OK
EN-16
Publicidad
