Fulgor Milano ACCENTO F4PGR304S1 Instrucciones Para La Instalación página 13

STEP 7
In case it is necessary to move the range; using the foam and/
or cardboard packaging (13), replace them around the range
strategically to protect the finished surfaces of the range from
contact with the hand-truck and any straps around the unit
(14). In the case of smaller ranges, you may use this technique
to remove the range from the skid and installing the legs (15).
Tilt the range to lower the hand-truck wheels off the skid. Place
appliance runners on the floor at the left and right sides in
front of the opening when moving into final position to protect
flooring. The oven door(s) add(s) a great deal to the overall
weight of the range, you may find it helpful to remove the
doors if moving the range a significant distance. Refer to the
included instruction manuals for how to remove and reinstall
the doors.
14
STEP 8
Some models come from the factory with the cast iron island
style trim pre-installed. If not pre-installed, follow the installation
instructions included with the island trim which also includes a
screw and bracket kit. The image below shows the installation
of the optional stainless steel accessory back guard / trims
available in island style, 3" height and 9" height for purchase
separately as accessories.
13
15
4 - Installation Instructions
EN
9" 3"
9