Important Safety Information
• Save all instructions
REPAIR, MAINTENANCE, AND ADJUSTMENT SAFETY
• After striking a foreign object, stop the engine. Remove the wire from the spark plug and keep the wire away from the
plug to prevent accidental starting. Thoroughly inspect the edger for any damage. If damaged, have the
equipment repaired by a trained technician before restarting and operating.
WARNING
• Stop the engine before cleaning, repairing, or inspecting the unit. Make sure all moving parts have stopped. Let the
engine cool, disconnect the spark plug wire and move it away from the spark plug.
• Never attempt to make any adjustments while the engine is running except when specifically recommended by the
manufacturer.
• Keep the edger in safe working condition. Check all fasteners at frequent intervals for proper tightness.
• When servicing or repairing the edger, do not tip the machine over or up unless specifically instructed to do so in this
Manual. Service and repair procedures can be done with the edger in an upright position. Some procedures will be
easier if the machine is lifted on a raised platform or working surface.
• Use only original equipment or authorized replacement parts.
WARNING
• Never tamper with safety devices. Check their proper operation regularly.
• Do not change the engine governor setting or over-speed engine.
• Clean and replace safety and instruction decals as necessary.
• To guard against engine over-heating, always have engine debris filter mounted and clean.
CHILDREN SAFETY
WARNING
• Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the
edger and the edging activity.
• Keep children out of the edging area and under the watchful care of a responsible adult.
• Never assume that children will remain where you last saw them.
• Be alert and turn edger off if children enter the area.
• Before and while moving backwards, look behind and down for small children.
• Never allow children to operate the edger.
• Use extra care when operating near blind corners, shrubs, trees, or other objects that may obstruct vision.
Questions? Call Toll Free at 1-800-737-2112
(Continued)
4
Copyright © 2008 MAT Engine Technologies, LLC