Publicidad
Idiomas disponibles
Idiomas disponibles
Symptom
Fluid leakage.
1. Bad o-ring gasket.
2. Dirty shaft seal.
3. Bad shaft seal.
4. Incompatible fluid.
5. Loose fasteners.
Pump hums but
1. Dirt in pump cavity.
will not operate.
2. Motor failure.
3. Broken rotor insert.
Bold text indicates repairs that are not serviceable by the owner; pump must be returned
to the point of purchase for repairs.
* Repairs marked with an asterisk (*) will require Repair Kit #300KTF7794. This kit
includes a replacement rotor and new vanes, as well as a number of other important seals
and components to complete the repair. Details of this kit are on page 13.
Accessories
A wide variety of accessories are available to help you maximize the performance of your
Fill-Rite pump. Listed below are the applicable available accessories for your specific
product.
Please contact your authorized Fill-Rite distributor to purchase the accessories you need.
Part Number
F4010PM0
F4030M0
700ACCF7017
FRPA125
Island Pedestal Mount Kit
KIT700AS
Anti-Siphon Kit
FRH10012
FRH10014
FRHA10020
FRHMN100S
N100DAU13
N100DAU10
FRNA100DAU00
S100H315
1
Safety Testing Approvals
The Fill-Rite line of pumps have been safety tested for compliance to
the standards set forth by UL Laboratories (NOTE : Motor only on
BD310V bio-diesel model).
Replacement Parts Information
For repairs or routine maintenance, Fill-Rite offers the parts you need. The following parts
diagram and list covers all applicable parts for your Fill-Rite product. These parts can be
obtained through any authorized Fill-Rite dealer. Be sure to use only genuine Fill-Rite
replacement parts for your service and maintenance needs. For a list of authorized dealers,
Cause
Check all o-ring gaskets.
Clean seal & seal cavity.
Replace seal.
Refer wetted parts list to fluid
manufacturer (see page 14).
Tighten fasteners.
Clean out pump cavity.
Return to place of purchase.
Remove all debris & replace insert.
Description
-Plane Swivel
11
Cure
- Diesel)
Publicidad
