L' ARTISTICO 40115 Manual De Instrucciones página 23

ENG PELLET FIREPLACE
(Rev. 15/10/2013)
Dear Customer,
Thank you for choosing one product from our range and we hope you will be fully satisfied.
I describe you hereunder the most outstanding features of our stove:
1. All our product have been build with high gauge steel (up to 3 and 4 mm for the combustion chamber) of the best
quality, and materials like vermiculite (skamolex) for the inner part of the combustion chamber. This give a clear
outlook to the stove but also shows a great heat resistance and allowed us to gain significant levels of heat output as
well as very low emission levels
2. For the electric and electronic components the best suppliers on the European market have been selected. The
main board, actually the heart the stove, has been developed by the market leader with over 1.000.000 parts on the
market.
3. Other components like smoke exhaust motors, pellet loading system and hot air fans have been selected with the
same concept: only the best available on the market. One example. For the pre-heater we could use a cheaper
component like al other competitors but we decided to install a double jacket. This gives us the possibility to install
the pre-heater right there in the fire place, where the pellet is. Why? To get a fast and safe starting of the stove!
4. Our philosophy is identifying us since tens of years and with a step by step check allow as gaining an outstanding
and unique quality level.
5. On the top of all other checks, electric and for single components, we have added the "FINAL FIRE CONTROL", a
check we already run since over 10 years for all or gas stoves. At the end of the production we do connect and fire all
stoves and thanks to a special electronic control, do simulate all the typical conditions like in your everyday use. In
this way we make 100% sure each single stove is working 100%.
6. Our whole production process, from the raw material to the finished product, is monitored step by step in order to
minimize the impact with the environment. As an example we are not using any more thinner based paints but only
powder and water based paints.
In other words, we have developed a family of nice and modern design inserts, easy to use and remote controlled
inserts. The remote control does integrate the day-date thermostat function.
All models are fitted with the external air inlet in line with the pre-heater. The outside air is getting warmed in the fire
pot but a part is used to keep the glass door clean. This makes the stove tight and ideal to be installed in class A or
BBC houses.
How could we get this result? First of all by choosing reliable top quality components and, last but not least, adopting
a high sophisticated construction technology. Our target hasn't been the price but the strengthens and the quality. On
the top of that, our 25 years heating system manufacturing experience and a two years intensive developing program
of a French – Italian technical team. The most innovative pellet insert nowadays available on the market is the result.
Quality comes from good project, experience and care in production and last but not least, the will of producing a
stove developed for lasting. All these know how is the result of 3 generations of entrepreneurs. For us it is a point of
honor being able to say we, since 3 generations do supply 3 generations of customers.