Publicidad
Idiomas disponibles
Idiomas disponibles
9. Screw U-support tube (#21) to Strut Tubes (#17) with
two Screws (#33) as shown in Figure 5. Align holes in
U-support with holes in Strut Tubes and thread screw
(#33) into hole in Strut Tube (#17) tighten screws all
the way but be careful not to over tighten. You could
strip threads on screws if you over tighten.
Note:
Due to shipping requirements the hinge (#18) may be
positioned as shown in Detail A, you will have to rotate the hinge to
the position shown in Detail B. DO NOT unscrew the hinge, you
can rotate the hinge without unscrewing it from the table.
If you want to see a video on how to position hinge (#18) go to:
http://www.escaladesports.com/customer-service/videos.html
10. Attach Hinges (#18) to Strut Tubes (#17) as shown in
Figure 5 and Detail B. With hinge positioned as
shown, align hole in hinge with hole in Strut Tube and
attach with ¼" Screw (#30), Plastic Washer (#38) and
Locknut (#34). Plastic Washer (#38) goes between
Strut Tube and Hinge. Tighten nut securely. Repeat for
other Hinge. CAUTION: Hinges must be
positioned exactly as shown or table will not
operate correctly and could be damaged.
Figure 5
37
Spacer (#37) goes
between Linkage (#16)
and Leg (#19 & #24)
29
17
34
16
18
34
19
21
33
30
Plastic Washer goes
38
between Strut Tube
(#17) and Hinge (#18)
16
17
11. Attach Linkages (#16) to Leg (#19 & 24) as shown
in Figure 5. Pivot one Linkage (#16) up and pivot
Leg out from top and align hole in Linkage with
hole in Leg (#19). Attach Linkage (#16) to Leg
(#19) using Hex Head Bolt (#29), Spacer (#37)
and Locknut (#34). Spacer (#37) goes between
Linkage and Leg. Attach other Linkage to Leg (#24)
the same way. Tighten nuts securely.
12. With at least two adults, repeat steps 8
.
through 11 for other table top assembly.
DO NOT OPEN THE TABLE TO PLAYING POSITION UNTIL
BOTH TOPS ARE INSTALLED! DO NOT LEAVE TABLE
STANDING UNATTENDED. IT COULD BE KNOCKED OVER
CAUSING SERIOUS BODILY INJURY OR PROPERTY DAMAGE.
37
34
24
16
38
30
18
6
ATTENTION: If hinge is positioned as
shown below (Detail A), Rotate the hinge
as shown in Detail B. Do not take the
hinge off the table.
18
29
Shipping position
of hinge
CAUTION: Position hinges exactly as
shown in Detail B or table will not operate
correctly and could be damaged.
Detail B
33
30
34
18
Assembly
position of hinge
Detail A
17
34
38
17
Publicidad
