Publicidad
Idiomas disponibles
Idiomas disponibles
Thanks for Choosing TOTO!............................................................................... 2
Thanks for Choosing TOTO!............................................................................... 2
Care & Cleaning...................................................................................................2
Care & Cleaning...................................................................................................2
Warnings............................................................................................................... 2
Warnings............................................................................................................... 2
Common Tools Needed..................................................................................... 2
Common Tools Needed..................................................................................... 2
Before Installation................................................................................................3
Before Installation................................................................................................3
Installation Procedure..........................................................................................3
Installation Procedure..........................................................................................3
Warranty................................................................................................................ 4
Warranty................................................................................................................ 4
Rough-in Dimensions .........................................................................................14
Rough-in Dimensions .........................................................................................14
THANKS FOR CHOOSING TOTO!
The mission of TOTO is to provide the world with healthy, hygienic and more
The mission of TOTO is to provide the world with healthy, hygienic and more
comfortable lifestyles. We design every product with the balance of form and
comfortable lifestyles. We design every product with the balance of form and
function as a guiding principle. Congratulations on your choice.
function as a guiding principle. Congratulations on your choice.
Your new showerhead is designed for years of trouble-free performance.
Your new showerhead is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with mild soap, rinsing
Keep it looking new by cleaning it periodically with mild soap, rinsing
thoroughly with warm water and drying with a clean, soft cloth. Do not use
thoroughly with warm water and drying with a clean, soft cloth. Do not use
abrasive cleaners, steel wool or harsh chemicals, as these will dull the
abrasive cleaners, steel wool or harsh chemicals, as these will dull the
Failure to follow these instructions may void your warranty.
Failure to follow these instructions may void your warranty.
If any nozzles become clogged with mineral build up, rub gently with
If any nozzles become clogged with mineral build up, rub gently with
to clean.
to clean.
For safe operation, please observe the following:
For safe operation, please observe the following:
Recommended operating pressure:
Recommended operating pressure:
Minimum pressure.........20 psi (138kPa), dynamic
Minimum pressure.........20 psi (138kPa), dynamic
Maximum pressure........80 psi (551kPa), static
Maximum pressure........80 psi (551kPa), static
Hot water supply temperature must not exceed 140°F(60°C).
Hot water supply temperature must not exceed 140°F(60°C).
Do not use steam for hot water supply.
Do not use steam for hot water supply.
Do not use the product at an ambient temperature below 32°F (0°C)
Do not use the product at an ambient temperature below 32°F (0°C)
or above 140°F (60°C).
or above 140°F (60°C).
Do NOT install product near hot air blowers, heaters, heat lights, or any
Do NOT install product near hot air blowers, heaters, heat lights, or any
other heat source as it may damage the product. Heat sources above
other heat source as it may damage the product. Heat sources above
140°F (60°C) placed near the product will damage the products internal
140°F (60°C) placed near the product will damage the products internal
and external components.
and external components.
Sealing tape
Sealing tape
TABLE OF CONTENTS
TABLE OF CONTENTS
THANKS FOR CHOOSING TOTO!
CARE & CLEANING
CARE & CLEANING
WARNINGS
WARNINGS
COMMON TOOLS NEEDED
COMMON TOOLS NEEDED
Screw driver
Screw driver
2
Adjustable wrench
Adjustable wrench
2
r tips
r tips
Publicidad
