Makita TD00000148 Manual De Instrucciones página 5

5. Charge the battery cartridge if you do not use
it for a long period (more than six months).
PARTS DESCRIPTION
This holder can be used for following Makita fan jacket/
vest and heated jacket /vest/blanket.
► Fig.1
Group
Fan jacket /vest:
A
DFV210, DFJ206, DFJ207, DFJ210, DFJ211,
DFJ212, DFJ213, DFJ214, DFJ216, DFJ304,
DFJ305, DFJ310, DFJ311, DFJ405, DFJ407,
DFJ410, DFJ411, DFJ416
Heated jacket / vest / blanket:
CV102D, DCV202, CJ105D, CJ106D, DCJ205,
DCJ206, CB100D, DCB200
B Fan jacket /vest:
DFJ212A, DFJ213A, DFJ214A, DFJ216A,
DFJ312A, DFJ416A, DFV210A, DFV214A,
DFV215A
1. Power level indicator
When using a fan jacket/vest, the power level is
displayed.
NOTE: If you use the fan jackets/vests in group A
listed above, the power level indicator 4 will not lights
up because their fan units employ 3-step control.
NOTE: If you use the heated jacket/vest/blanket, only
the power level indicator 4 will lights up.
2. Power button
To turn on, insert the battery cartridge and then press
and hold the power button until the power level indicator
lights up.
To change the power level of the fan jacket/vest, press
the power button briefly when the power is turned on.
To turn off, press and hold the power button until the
power level indicator turns off.
NOTE: To change the warmth of the heated jacket/
vest/blanket, press the button on the heated jacket/
vest/blanket when it is powered.
3. Power socket
Connect the cable from the jacket/vest/blanket or the
adapter cable.
4. Adapter cable for fan jacket/vest (optional
accessory)
Use adapter cable when using the products in group A
listed above.
5. Adapter cable for heated jacket/vest/blanket
(optional accessory)
Use adapter cable when using the products in group A
listed above.
6. Power cord of the jacket/vest/blanket
For the products in group A listed above, connect the
suitable adapter cable for the fan jacket/vest or heated
jacket/vest/blanket.
For the products in group B listed above, connect to the
power socket of the battery holder.
Model
NOTE: The shape and location of the socket vary
depending on your jacket/vest/blanket.
7. Battery cartridge (optional accessory)
Insert the battery cartridge to the holder all the way until
it locks in place with a small click.
FUNCTIONAL
DESCRIPTION
Installing or removing the battery
cartridge
CAUTION:
Hold the battery holder and the
battery cartridge firmly when installing or remov-
ing the battery cartridge. Failure to hold the battery
holder and the battery cartridge firmly may cause
them to slip out of your hands and result in damage
to the battery holder and battery cartridge and/or a
personal injury.
CAUTION:
Always switch off the device
before removing the battery cartridge.
► Fig.2: 1. Red indicator 2. Button 3. Battery cartridge
4. Battery holder
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert the battery cartridge all the way until
it locks in place with a small click. If you can see the red
indicator on the upper side of the button, it is not locked
completely.
To remove the battery cartridge, slide it from the battery
holder while pressing the button on the front of the
cartridge.
CAUTION:
Always install the battery car-
tridge fully until the red indicator cannot be seen.
Otherwise the battery cartridge may accidentally
fall out of the battery holder, causing injury to you or
someone around you.
CAUTION:
Do not forcibly install the battery
cartridge. If the battery cartridge does not slide in
easily, it is not being inserted correctly.
Attaching the battery holder
You can hang the battery holder on your waist belt.
To prevent the battery holder from dropping acciden-
tally, attach a strap using the strap hole and secure it.
► Fig.3: 1. Strap hole
The battery holder has an anti-drop function. When
removing the battery holder from the belt, pull up the
battery holder while pressing the unlock button.
► Fig.4: 1. Unlock button
5 ENGLISH