Publicidad
Idiomas disponibles
Idiomas disponibles
Rubber seal gaskets
Screw for hot water outlet
Adjusting handle for
mixing valve
④
If the users want to realize a multi-way supply system, refer to the method shown in fig.5 for
connection of the pipelines.
Triple joint
Water pool
Please be sure to use the accessories provided by our company to install this electric
water heater. This electric water heater can not be hung on the support until it has been
confirmed to be firm and reliable. Otherwise, the electric water heater may drop off from
the wall, resulting in damage of the heater, even serious accidents of injury. When
determining the locations of the bolt holes, it shall be ensured that there is a clearance
not less than 0.2m on the right side of the electric heater, to convenient the maintenance
of the heater, if necessary.
Hot water outlet
Shower nozzle
Hot
water
outlet
Mixing valve
NOTE
Power cord
Cold water inlet
Rubber seal gaskets
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Power cord
Main machine
Pressure relief valve
Water inlet valve
Cold
water
inlet
6
(Fig.4)
Shower nozzle
Water inlet valve
Running water pipe
(Fig.5)
V.1
Publicidad
