Publicidad
Idiomas disponibles
Idiomas disponibles
7. Cleaning and Maintenance
This luminaire does not have a built-in device to disconnect it from the
electric mains. Make sure to electrically isolate the luminaire before
installation or maintenance activities are performed.
All screws should be tight and free of corrosion.
The housing, the visible parts, the mounting supports and the
installation location (e.g. ceiling, suspension, trussing) should not be
deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...
The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
If the protective glass is damaged, disconnect the lamp immediately
from the mains. Have it repaired immediately by a qualified technician.
Do not use the lamp with a cracked or broken protective glass.
Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
8. Technical Specifications
body colour
electrical data
power LED module
total nominal power
nominal voltage driver
power factor
energy consumption
light technical data
colour
colour temperature
beam angle
luminous flux
colour rendering index
starting time
warm-up time (60 %)
V. 02 – 16/11/2015
LEDA200xNW-BP
LEDA2001NW-BP
7.5 W COB
10 W
0.85
10 kWh/1000 h
750 lm
7
LEDA2002NW-BP
black
17.25 W COB
220-240 VAC
20 kWh/1000 h
neutral white
4000 K
120°
1500 lm
> 70
< 0.5 s
< 1 s
20 W
0.9
©Velleman nv
Publicidad
