Publicidad
Idiomas disponibles
Idiomas disponibles
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "cable" channels. After the available
channels are memorized, use the CH
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Manager).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to
the TV (i.e. an Air or a cable system).
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Channel", then press the
ENTER button.
2. Press the ENTER button. Repeatedly press the ▲ or ▼ buttons to cycle
through these choices: "Air", "STD", "HRC" or "IRC" (all cable TV).
Press the EXIT button to exit.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
At this point, the signal source has been selected.
Proceed to "Storing Channels in Memory (Automatic Method)"
Storing Channels in Memory (Automatic Method)
1. First, select the correct signal source (Air, STD, HRC or IRC).
2. Press the ▲ or ▼ buttons to select "Auto Program", then press the ENTER button.
3. Press the ENTER button to select "Start".
The TV will begin memorizing all of the available channels.
The TV automatically cycles through all of the available channels and stores
them in memory. This takes about one to two minutes. Press the ENTER
button at any time to interrupt the memorization process and return to the
"Channel" menu.
4. After all the available channels are stored, the
"Channel" menu reappears. Press the EXIT button to exit.
To stop the search before it has finished, press the ENTER button with "Stop"
selected.
or CH
buttons to scan through the channels. This eliminates the need to change
English -
TV
Channel
Air/Cable
: Air
Auto Program
Channel Manager
Fine Tune
Color System
: Auto
Move
Enter
TV
Channel
Air/Cable
:
STD
Auto Program
HRC
Channel Manager
IRC
Fine Tune
Color System
: Auto
Move
Enter
TV
Channel
Air/Cable
: Air
Auto Program
Channel Manager
Fine Tune
Color System
: Auto
Move
Enter
Auto Program
Air
Stop
Enter
Return
►
►
►
►
►
Return
Air
Return
►
►
►
►
►
Return
0
Publicidad
