Publicidad
Idiomas disponibles
Idiomas disponibles
Wall-Mount Adjustment (LN0SB LNSB)
Once the wall mount is installed, the position of your TV can be easily adjustable.
Entering the menu
. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
. Press the ▲ or ▼ buttons to select "Wall-Mount Adjustment",
then press the ENTER button.
. Adjust to the desired position using the ▲,▼,◄,► buttons.
. Press the EXIT button to exit.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
Using the Remote Control Buttons
Button
Wall-mount angle
P.MODE
S.MODE
STILL
adjustment
Reset
P.MODE
S.MODE
STILL
Remembering the
STILL
P.MODE
S.MODE
position and moving
to the remembered
green
red
position
button yellow
button
button
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation
company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
TV Rear Panel
Serial Cable(P to P)(Not supplied)
Tilt Up, Tilt Down, Move right, Move left
Moves to the initial installation position
1. Select the direction buttons of the remote control.
2. Press the red button (Select Position 1).
3. Adjust the set to a desired position following the wall mount operating
procedures.
4. The position you adjusted last is memorized as Position 1.
5. By using the green button (Select Position 2), and the yellow button
(Select Position 3), you can save positions according to the procedures
above.
6. You can save 3 respective positions to the red button (Select Position 1),
green button (Select Position 2), and yellow button (Select Position 3).
If you press a button, the set automatically moves to that saved angle.
7. If you additionally move the set from a saved position, the last position is
saved as the "final position".
English -
(Sold separately)
Auto Wall-Mount
TV
Position
Position
Adjust
Operations
Setup
▲More
PC
►
Home Theater PC : Off
►
Energy Saving
: Off
►
AV Color System : Auto
►
Wall-Mount Adjustment
►
PIP
Move
Enter
Return
Wall-Mount Adjusment
Center
Exit
INFO
Publicidad
