LG DLEX2650 Serie Manual Del Propietário página 28

CONTROL PANEL FEATURES
Following are instructions for starting and using your new dryer. Please refer to specific sections of
this manual for more detailed information.
w WARNING: To reduce the risk of fire, electric shock, or injury to persons , read this entire
manual, including the Important Safety Instructions, before operating this dryer.
POWER ON/OFF BUTTON
A
Press to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE: Pressing the ON/OFF button during
a cycle will cancel that cycle and any load
settings will be lost.
B
CYCLE SELECTOR kNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will be shown in the display.
On MANUAL DRY cycles, these settings can be
adjusted using the cycle setting buttons anytime
before starting the cycle.
C START/PAUSE BUTTON
Press this button to START the selected
cycle. If the dryer is running, use this button
to PAUSE the cycle without losing the current
settings.
NOTE: If you do not press the START/PAUSE
button to resume a cycle within 4 minutes,
the dryer turns off automatically.
MORE TIME/LESS TIME BUTTONS
D
To adjust the drying time, use these buttons
with MANUAL DRY, TIME DRY, and STEAM
FRESH™ cycles, as well as the REDUCE STATIC
and EASY IRON options. Press the MORE TIME
button to increase the selected manual cycle
time by a minute; press LESS TIME to decrease
the cycle time by a minute.
28
H
A B
H D
C
CYCLE SETTING BUTTONS
E
Use these buttons to select the desired cycle
settings for the selected cycle. The current
settings are shown in the display. Press the
button for that option to view and select other
settings.
TIME AND STATUS DISPLAY
F
The display shows the settings, estimated
time remaining, options, and status messages
for your dryer.
OPTION BUTTONS
G
The OPTION buttons allow you to select
additional cycle options. Certain buttons
also allow you to activate special functions
by pressing and holding the button for 3
seconds.
For detailed information about the individual
options, please see the following pages.
STEAM FUNCTIONS
H
LG's steam technology allows you to
inject fabrics with a swirling jet of hot
steam to refresh clothes, reduce static,
and make ironing easier. Simply select the
STEAMFRESH
STEAM option to selected cycles.
For detailed information about the individual
options, please see the following pages.
F
E
cycle, or you can add a
™
G