Publicidad
Idiomas disponibles
Idiomas disponibles
<RF25HM**>
2" (50 mm)
125°
(1430 mm)
32 3/4" (830 mm)
4 1/4" (106 mm)
1 3/4" (45 mm)
Each measurement based on the design
dimension, so it may differ depending on
the measuring method.
CAUTION
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor).
Refer to 'Adjusting the doors' on page 14.
Flat-blade screw
driver(-)
DA68-02601G-00.indb 10
125°
56 1/4 "
11 3/4"
(300 mm)
Control Lever
English - 10
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor. This surface
should be strong enough to support a fully loaded
refrigerator. To protect the finish of the flooring, cut
a large section of the cardboard carton and place
it under the refrigerator where you are working.
When moving a refrigerator, you need to pull and
push it straight forwards or back. Do not wiggle it
from side to side.
REQUIRED TOOLS
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
Flat-blade
screwdriver(+)
screwdriver(-)
Allen wrench
(3/16") (5 mm)
Socket wrench
(13/32") (10 mm)
2014. 12. 4.
3:05
Publicidad
