Wolf VW30S Guia De Instalacion página 8

INSTALLATION
Installation
INTERNAL BLOWER
IMPORTANT NOTE: The blower must be installed and
plugged in prior to making the electrical connection to the
hood.
For models with a bottom panel, the panel must be removed
prior to installing the blower. Refer to the illustration below.
Remove the filters.
1
For model VW30S, remove the screw cover and screw to
2
remove the spacer. Refer to the illustration below.
Insert the three-prong plug from the blower wire into the
3
hood receptacle. Refer to the illustration.
Insert the blower by aligning the round discharge on the
4
blower with the discharge on the hood.
Insert the plug from the blower wire into the receptacle
5
on the blower. Refer to the illustration.
Secure the blower to the hood using the two mounting
6
screws provided.
For model VW30S, install the spacer, screw, and cover.
7
TAB
Bottom panel removal
8 | Wolf Customer Care 800.222.7820
All manuals and user guides at all-guides.com
SPACER
Spacer removal (model VW30S)
RECEPTACLE
Hood receptacle
RECEPTACLE
MOUNTING
SCREW
Mount blower