Beper 40.809 Manual De Instrucciones página 9

Personal scale Use instructions
WIRED TRANSMISSION MODE Fig.2
Step onto the scale platform directly
Weight reading stabilized and shines for 3 times
WIRELESS TRANSMISSION MODE Fig.3
Step onto the scale platform directly (do not cover the infrared receiver)
Weight reading stabilized and shines for 3 times
TO SET WEIGHT UNIT Fig.6
If the scale is with both measuring system of Metric (kg) and Imperial (lb), you can press
"UNIT" button to convert between two systems before weighing. The "UNIT" button is in­
side the battery case of read­out display as shown in picture.
TO INSTALL OR REPLACE BATTERY Fig.4
2x3V lithium batteries (CR2032) included. One for main unit, the other for read­out display.
A. Take out the used battery with the aid of a sharp object, as shown in picture.
B. Install new battery by putting one side of the battery beneath the battery baffle and then
pressing down the other side. Please take note to the polarity.
LOW BATTERY/OVERLOAD INDICATION Fig.5
Low battery power for read­out display. Please replace battery.
Low battery power for main unit. Please replace battery.
Scale overloaded. Please step off to avoid damage.
TECNICAL DATA
Capacity: 150kg/330lb
Graduation: 0.1Kg/0.2lb
Use 2 batteries CR2032 (included)
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.
9