Publicidad
Idiomas disponibles
Idiomas disponibles
Door seals cleaning
Take care to keep door seals clean. Sticky
food and drinks can cause seals to stick to
the cabinet and tear when you open the
door. Wash seal with a mild detergent and
warm water. Rinse and dry it thoroughly
after cleaning.
Caution!
Only after the door seals are completely
20
dry should the appliance be powered on.
Replacing the LED light
Warning: The LED light must be replaced
by a competent person. If the LED light is
damaged, follow the steps below:
1.
Unplug the refrigerator from the
electrical outlet.
2.
Locate the LED light on the inside of
the refrigerator.
3.
Remove the light cover. Insert a tool
(tweezers or a screwdriver) along the side
opening of the LED light cover. Pop open
the side over the cover, grasp the exposed
side and gently pull towards you to remove
the item and expose the LED light.
4.
Replace the new LED light.
5.
Replace the light cover.
Publicidad
