Roadstar RU-280BT Manual De Instrucciones página 8

HOW TO USE BLUETOOTH IN YOUR CAR AUDIO
How to Perform Pairing:
Before you can dial out from the car stereo, you must first perform PAIRING. Pairing is a
procedure used to connect 2 Bluetooth devices together.
1. This unit's Bluetooth function is always on, perform the pairing starting from your
cellular phone. Refer to your cellular manual on proper pairing.
2. Perform the search for available Bluetooth devices, "RU-280BT " will show.
3. After successful pairing (BT-ON appear in the display), connect to the head unit if it is
not automatically connected.
HOW TO MAKE OR RECEIVE PHONE CALLS
The phone calls can be made only by the dial keys of Mobile Phone.
1. Press the BAND button to answer of incoming calls.
2. During the phone conversation, press the BAND button to finish.
SPECIFICATIONS
TUNER
Sensitivity 2 dBμ
Stereo separation 35 dB
Signal to noise radio 55 dB
Frequency range 87.5-108 MHz
Channel step 50 kHz
Intermediate frequency 10.7 MHz
LINE-OUT
Output 350mV max.
Impedance 10kOhm
GENERAL
Power Supply 13.8V DC
(10.8-15.6V allowable)
Speaker impedance 4 or 8 ohm
Output power 7,5 W RMS x 4CH
Note: Specifications and the design are subject to possible modification without notice due
to improvement.
All manuals and user guides at all-guides.com
11
English
12
English