Descargar Imprimir esta página

THOMSON MIC201IDABBT Instrucciones De Funcionamiento página 24

Dab/ cd/ bluetooth/ fm usb/ entrada de audio

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
Snooze
1. Whenever the alarm (alarm 1, alarm 2) comes on, it can be temporarily suspended for a short
period of approximately 9 minutes, by pressing the "SNOOZE" key once.
2. The alarm (alarm 1, alarm 2) will then automatically come on again after approximately 9 minutes
"snooze" period has ended.
3. And the "snooze" symbol will show on the display to remind that the snooze function is active.
4. To deactivate the snooze, press and release the "POWER" key once.
Sleep Timer
1. Repeatedly press the SLEEP button,you can set 90/80/70/60/50/40/30/20/10 minutes.this is
useful for sleeping to music at night.
2. If you want to cancel the sleep mode, repeatedly press SLEEP to select OFF, the sleep mode will
cancel.
Display Backlight
You can press the DIM button adjust the display backlight brightness, there are 3 options available,
High, Medium and Low.
DAB Radio mode
Carefully extend the telescopic aerial.
Press the POWER button to turn on the unit, it will auto into DAB mode.
Auto Scan
1. Press the SOURCE to select "DAB MODE".
If this is the first time the unit has entered DAB Mode, it will automatically start an 'Auto
Scan' to search for available stations. (Once DAB Mode has been used before, the unit will
automatically select the previously played station)
2. Press ENTER button to automatically start auto scan to search for available station.
During the scanning process, the lower line of the display shows a bar graph indicating the
progress of the scan.
Manual Scan
1. Press the SOURCE key on main unit to select "DAB MODE".
2. Press the [
the service menu.
3. Press [
strength.
4. Press [MENU] or [
5. If no stations are found, please ensure the aerial is extended and test the reception by doing
another auto scan in a different location.
] or [
] button to select "Manual tune", press the [ENTER] button to enter
] or [
] to tune in the desired channel. The graph will indicate the signal
] to exit scan.
- EN 7 -

Publicidad

loading

Este manual también es adecuado para:

Mic200idabbtMic205idabbt