Publicidad
Idiomas disponibles
Idiomas disponibles
2. Audio Setting
2.1. Stereo allowed:
2.2. Forced mono
2.3. System (FM system), same DAB system setting.
3. PRESET:
3.1. Preset Recall (Choose the Station):
Press ENTER, tune to the station stored in preset memory.
3.2. Preset Recall (Choose the Station):
You may store your preferred FM stations to the preset station memories. There are 20
memory presets in your radio. Presets are remembered by your radio in the event of a
power failure.
The procedure for setting presets and using them to tune stations is the same for DAB
modes:
In FM mode, select the desired wave band. Press [▲, ▼] to view the stored stations,
press
press [ENTER] to select the preset number under which you will store the station. Press
[ENTER] to confirm.
Bluetooth Mode
You must follow several steps to connect your mobile phone:
1. Activate Bluetooth from your mobile phone (please refer to your phone's user manual)
2. Press POWER button to turn on the unit, then press the SOURCE button repeatedly until the
"Bluetooth" indicator appears on the LCD display. It will be ready to pair automatically.
3. Use your mobile phone to search for the Bluetooth device named "MIC200IDABBT"/"MIC201DABBT"/
MIC205IDABBT".
4. Your mobile phone will find "MIC200IDABBT"/"MIC201DABBT"/"MIC205DABBT" and will present
the option to connect or not. Please connect to it using the password "0000" (if any). When you
are successfully connected, the Bluetooth indicator "Bluetooth connected" appears on the LCD
display.
Automatically Connecting with Your Phone
Pairing is only needed the first time the unit and phone are used together. When the unit and phone
have been paired once, they will automatically connect when the unit is on and Bluetooth is activated
or
to tune to the required station as previously described, and then
- EN 10 -
Publicidad
