Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Setup
8.
Use the CURSOR PAD
brand name of your DVD.
9.
Press the CURSOR PAD
CODE Set, then use the CURSOR PAD
to choose the preset IR Code.
10. Use the CURSOR PAD
" POWER " Test button.
These On-screen buttons are called " Soft
Keys ".
11. Press the SELECT button to pass the Power
command through the IR Blaster and onto the
DVD.
( Repeat steps 9 to 11 until finding the IR code
that will power up the DVD. If the DVD turns
ON, then you have found the correct preset
IR code ).
12. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name
Hitachi
IR Code Set
1
Transmission Test
Test Button
POWER
Change Brand Name
Move
13. Use the CURSOR PAD
Input that connects the DVD video output and
then the TV input for the DVD audio output.
14. Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name
Hitachi
IR Code Set
1
Inputs settings
Video Input
Not Connected
Audio Input
Not Connected
Move
Change Source
15. Confirm all settings, then press the SELECT
button to move on to the next SETUP screen.
AV Net Setup Wizard : Device Settings
DVD Settings
Brand Name
Hitachi
IR Code Set
1
(1/5)
Video Input
Not Connected
Audio Input
Not Connected
All settings are complete!
Select
Move
SEL
70
or
to choose the
to highlight the IR
or
to highlight the
,
,
and
to
(26/77)
(1/5)
CH
Back
Next
or
to select the TV
,
,
and
to
(26/77)
(1/5)
Back
Next
Select
SEL
(26/77)
Back
Next
16.
Press the SELECT button to select YES to
Setup another device. Press the CURSOR
PAD
or
to highlight " No thanks, I'm done
", then press the SELECT button to exit the
AV NET SETUP.
AV Net Setup Wizard : Device Settings
Congratulations!
Your DVD is now
connected to your AV network.
Would you like to setup another device?
No thanks, I'mdone.
Select
Move
SEL
Learning Mode
This function of the AV NET allows the user to use
equipment that is not precoded in the AV NET codes.
After programming your equipment to the AV NET and
the Soft Keys do not work, you can manually "LEARN"
each one by completing the Learning Mode. The
Learning Mode will transfer any remote control button
IR code of your equipment to the "Soft Keys" of your
AV NET.
Learning Mode (Example: A/V Receiver
Setup)
1.
Press the SELECT button to start the SETUP
WIZARD.
AV Net Setup Wizard
Welcome to the AV Net Setup Wizard.
Before starting this wizard, please make sure
that all devices are connected appropiately
and the IR blasters are placed in front of the
devices IR sensor.
Move
Return
SEL
2.
Use the CURSOR PAD
YES.
3.
Press the SELECT button to select.
4.
Use the CURSOR PAD
highlight NEXT, then press the SELECT button
to move on to the next SETUP screen.
AV Net Setup Wizard : A/V Receiver Setup
Do you want to use an A/V Receiver?
Yes
No
Move
Select
SEL
Yes
Back
Start
or
to highlight
,
,
and
to
Back
Next
Publicidad
