Publicidad
Idiomas disponibles
Idiomas disponibles
Read and follow the steps below to play a tape.
1
Turn on the TV. Set it to the correct Video In
channel. (Check your TV owner's manual for details.)
Details are on page 8.
2
Insert a tape in the cassette compartment of
the DVD/VCR. VCR light will appear on the front of the
DVD/VCR. If the tape's record tab has been removed,
playback will start automatically.
If the DVD/VCR power is already on, press VCR to put the
DVD/VCR in VCR mode if necessary. VCR light will appear
on the front of the DVD/VCR.
●
If playback does not start automatically, press VCR, then
press PLAY B.
●
Press STOP C to stop playback.
●
Press REW h to rewind the tape.
●
After the tape stops, press STOP/EJECT CA on the front
of the DVD/VCR to remove the tape.
All manuals and user guides at all-guides.com
Video Cassette Playback 15
1
Turn on the TV.
2
Insert a tape in the
DVD/VCR.
OPEN/CLOSE
1
2
3
4
5
6
TRACKING
7
8
9
CLEAR
TITLE
+10
0
VCR
SETUP
DVD
DISC
INPUT
MENU
OK
REW
PLAY
FFW
STOP
PAUSE
BACK
DISPLAY SUBTITLE
ZOOM
AUD O
ANGLE
SEARCH REPEAT
REPEAT
A B
REC
SPEED
MODE
TIMER SET
Helpful Hints
• Other tape playback features are
on pages 29-32.
• If AUTO REPEAT is ON,playback
will begin when you insert a tape,
even when the record tab is
intact.Details are on page 29.
• You must connect the DVD/VCR
to a TV using the audio/video
cables in order to use the VCR
features.These hookups are
explained on pages 9 and 11.
Publicidad
