Publicidad
Idiomas disponibles
Idiomas disponibles
8 Hookups
Determining the best possible connection...
Your hookup will be determined primarily by your existing equipment,especially your TV. These guidelines describe
which options have the best picture and sound quality. You will not use all the jacks on the DVD/VCR.
★ ★ ★ ★ ★ ★ ★ ★ If your TV has Component Video In jacks (which could be labeled Y CR CB, Y PR PB or YUV and may be
green,blue and red),use the Component Video jacks (Y C
only this video connection,only the DVD picture will be available. To see DVD features on the TV,set the TV
to its Component Video In channel.Component Video provides the best picture quality.See page 10.
Progressive Scan provides less flickering and higher image resolution than traditional (525i/480i or interlace)
TV signals.
If your TV has Progressive Scan (525p/480p or progressive),connect the TV to the DVD/VCR's
COMPONENT VIDEO OUT (Y C
DVD/VCR's DISPLAY Menu.See pages 50-51. P.SCAN will appear on the DVD/VCR's display panel.Set your TV to
Progressive Scan also.
If your TV does not have Progressive Scan but has Component Video In jacks,connect
them to the DVD/VCR's COMPONENT VIDEO OUT jacks (Y C
SCAN) to OFF either in the DISPLAY Menu or by pressing and holding PLAY B (DVD) on the front of the
DVD/VCR for more than 5 seconds.See pages 50-51.
★ ★ ★ ★ ★ ★
If your TV has an S-Video In jack (which also may be labeled Y/C or S-VHS),use the S-VIDEO OUT jack for
excellent picture quality.If you use only this video connection,only the DVD picture will be available. To see
DVD features on the TV,set the TV to its S-Video In channel.See page 10.
★ ★ ★ ★
If your TV has a single yellow Video In jack (which also may be labeled CVBS,Composite or baseband),use
the yellow DVD/VCR VIDEO OUT jack for good picture quality. This connection provides a picture for both
the DVD player and the VCR. To see DVD or VCR features on the TV,set the TV to its Video In channel.See
page 9
★ ★ ★ ★ ★ ★ ★ ★ If you have a Stereo with a Coaxial Digital Audio In jack,this provides the clearest sound for the DVD player.
Connect the DVD/VCR's COAXIAL DIGITAL AUDIO OUT jack to your Stereo for the best sound quality.If
you use only this audio connection,only disc sound (no VCR) will be available.See page 12.
★ ★ ★ ★ ★ ★
If digital audio connections are not possible,connect the DVD/VCR's red and white DVD/VCR AUDIO OUT
jacks to the Audio In jacks of your Stereo or TV. This connection provides sound for both the DVD player
and the VCR.See pages 10-11.
Before you begin...
● ●
Refer to the manuals of your TV,Cable Box,Stereo or other devices as necessary.Note the style of jacks and
connectors on the other equipment.Determine how to choose different Audio and Video In channels on your
other equipment so you can see and hear the DVD/VCR material playing on the TV,Stereo,etc.
● ●
Disconnect all equipment from the power outlets.Connect the equipment to power only after you have finished
hooking up everything.Never make or change connections with equipment connected to power.
Remember...
● ●
Set the TV to the correct Video In channel.Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or
A/V IN,EXT1 or External In,etc. These channels often are located near channel zero (0).Or,your TV's remote may
have a button or switch that selects the Video Input channel.See your TV manual for details.If you do not see the
DVD or VCR playback on the TV,go to the lowest TV channel (01 or 02) and change channels downward until you
see the DVD or VCR picture on the TV.
To help you find the right Audio/Video In channel,turn on the DVD/VCR.Press DVD to put the DVD/VCR in DVD
mode. With no disc in the player,a large DVD Video logo will appear on the TV screen when you get the TV on the
correct Audio/Video In channel.
● ●
Set the Stereo to the correct channel or "source" mode.
● ●
Depending on your connection,you may need to purchase additional cables or adaptors.If your TV or monitor has
BNC-type connectors,you will need an adaptor.
Once you determine the best option, find your choice on pages 9-12. Follow the steps for the
hookup you choose. Then, go to page 14 to complete the first-time setup.
All manuals and user guides at all-guides.com
/P
C
/P
) jacks.Set Progressive Scan (PROG.SCAN) to ON in the
B
B
R
R
/P
C
/P
) for the best picture quality.If you use
B
B
R
R
/P
C
/P
).Set Progressive Scan (PROG.
B
B
R
R
Publicidad
