Pioneer KURO PRO-FPJ1 Manual De Instrucciones página 41

Cleaning and Replacing the Filter
Clean the filter regularly or air intake efficiency may deteriorate and malfunction may occur.
A
Remove the inner filter
B
Clean the filter
Wash the filter with water and dry it in a shaded area.
In extremely soiled cases, use of a neutral detergent is recommended.
Put on rubber gloves when using a neutral detergent.
After washing the filter with water, make sure that it is completely dry before
reinstalling. Otherwise, electric shocks or malfunctions may occur.
Do not clean the filter with a vacuum cleaner or air duster. The filter is soft
and may be damaged.
C
Reinstall the inner filter
Check that the left and right
claws are locked onto the unit
All manuals and user guides at all-guides.com
Lift up while pushing the claw
ENGLISH
CAUTION
Pull the power plug from the power
outlet.
MEMO
If the filter is damaged or too
dirty to be cleaned
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replace with a new filter. A dirty
filter will dirty the internal parts of
the unit and cause shadows on the
video image.
To purchase a new filter or when
there is dirt in the internal parts,
consult your authorized dealer.
Inner Filter
Part No. : LC32058-002A
41