Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
–
Do not mix old batteries with new ones or mix different types of
batteries together.
–
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
REMOTE CONTROL KEYS
Œ
Power Key—Press to turn TV ON or OFF.
Input Key—Press to select the program source to watch:
TV signal or signal from DVD Player or other equipment
you have connected to the AV jacks.
Ž
Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key until
C1–– appears. Then press the other two numbers.
Caption Key—(See page 12.)
Menu Key—Use this key with the L M and – + keys to
navigate and adjust features of the on-screen menu system.
(See pages 10 ~ 12.)
‘
Channel Scanning (CH LM) and Volume (VOL – +)
Keys—Press to scan through the channels in memory and
to adjust the volume.
I Be sure batteries are installed correctly.
I Point the remote control toward the TV. Objects between the remote
control may cause misoperation of the remote control function.
I Cannot select channel with number keys. Press "0" in front of
numbers 1~9. Example: Channel 05.
I Adjusting the volume level: Flashing Right arrow indicates volume is
increasing and flashing Left arrow indicates volume is decreasing.
USING THE REMOTE CONTROL
Need help?
Œ
Ž
‘
www.sanyoctv.com
Visit our Web site at
Point towards TV
POWER
INPUT
RESET
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
CAPTION
SLEEP
0
0
MENU
RECALL
CH
VOL
VOL
MUTE
DISPLAY
CH
(Continued on page 10. )
1-800-877-5032
or Call
9
Publicidad
