Sylvania LC225SSX Manual Del Usuario página 12

P
REPARATION
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
[PC Connection]
This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor.
Use an VGA cable for this connection and it requires stereo mini plug audio cable as well.
e.g.)
personal computer
The following signals can be displayed:
Format
VGA
SVGA
XGA
Other formats or non-standard signals will not be displayed correctly.
Note:
• Please purchase the VGA cable that has a ferrite core.
• The following operations may reduce noise.
- Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.
AC outlet
Caution:
• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
Note:
• Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.
12
EN
VGA cable should be
with ferrite core.
Resolution Refresh rate
640 x 480 60Hz
800 x 600 60Hz
1,024 x 768 60Hz
VGA cable
stereo mini plug audio cable
Format
WXGA
AC power cord
rear of this unit
Resolution Refresh rate
1,280 x 768 60Hz
1,360 x 768 60Hz
rear of this unit