Descargar Imprimir esta página

Naxa SBB-61250 Manual De Operación página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting the Volume
• Use the VOL– and VOL+ keys [9, 10] to decrease or
increase the volume level, respectively.
• Press the MUTE key on the remote to disable sound
output completely. Press the MUTE key again to
restore sound output.
Using Bluetooth Mode
Press SOURCE to set the active mode to Bluetooth.
Pairing a Bluetooth Device
You will need to pair your Bluetooth device with
the sound bar the first time you use them together.
1. Press the STANDBY/SOURCE button [7] until
the Source LED turns blue.
2. Enable Bluetooth on the source device and use it
to search for other Bluetooth devices. (Refer to the
user manual of your device if you need help with
this step.) Select the NAXA SBB-61250 sound bar
when the device finds it. If the device prompts you
for a pass code, enter "0000".
www.naxa.com
®
®
3. Once you have successfully paired, you will be able
to stream music wirelessly from your device to the
sound bar. Some devices may allow you to control
playback from the sound bar; otherwise, control
playback on the device itself.
4. If the pairing attempt fails, the sound bar may have
timed out. Try starting the pairing proccess again
Only one device can be paired with the sound
bar at a time. Disable Bluetooth on other
devices to prevent interference. The sound
bar will try to reconnect automatically with
the last paired device when it is placed in
Bluetooth mode. If the Bluetooth connection
is lost due to external factors, or it will not
reconnect automatically, you may need to
pair again with the NAXA SBB-61250. Clear
the NAXA SBB-61250 from the Bluetooth
device list on your source device before
pairing again.
Page 11

Publicidad

loading

Productos relacionados para Naxa SBB-61250