Philips SHC8585 Instrucciones De Manejo página 7

SHC8585 22-12-2005 10:45 Pagina 7
IMPORTANT!
• The energizing docking station does not transmit audio signal
when charging is activated.
WARNING!
• Before using the FM headphone for the first time, please ensure
that the batteries are fully charged for at least 16 hours.
This will guarantee a longer operating lifetime of batteries.
• This product complies with the latest safety regulations.
Please only charge the batteries with the docking station provided
(SHC8585) or with fully compatible charger.
Audio Connection
9 Connect one end of the audio cable (3.5 mm stereo plug) to the
transmitter's 3.5 mm STEREO INPUT JACK.
10 Connect the other end of the 3.5 mm stereo cable to either:
a) The headphone output of an audio source, such as TV, HiFi or PC.
Adjust the volume level of the audio source to a fixed reasonably high level;
for example 25% of the maximum level.
• In case your audio source has a 6.3mm headphone output, use the
supplied 3.5mm to 6.3mm stereo adapter plug.
IMPORTANT!
• In case of certain TVs, the headphone jack output level can only
be adjusted after accessing the TV on-screen menu.
b) The line output of an audio source, such as REC OUT or LINE OUT
(with the Y-cable supplied).
• Check if the red RCA plug (right channel) is connected to the right
channel (red) of the audio source.
• Check if the white RCA plug (left channel) is connected to the left
channel (white) of the audio source.
• In case the audio source has an adjustable RCA output level,
adjust the output level to the highest acceptable undistorted level.
11 Switch on your audio source and carefully increase the volume of the
audio source.
The POWER ON/OFF INDICATOR of the transmitter lights up when
signals are received.
12 Switch on the POWER ON/OFF button of the headphone.
The POWER ON/OFF INDICATOR will be switched on automatically.
ENGLISH 7