2. Clean the condenser coils regularly. They are located
behind the base grille. Coils may need to be cleaned as
often as every other month. This may help save energy.
3. Use a vacuum cleaner with an extended attachment to
clean the condenser coils when they are dusty or dirty.
4. Replace the base grille.
5. Plug in Beverage Center or reconnect power.
Try the solutions suggested here fi rst in order to avoid the cost of an unnecessary service call.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
TROUBLESHOOTING
10
Vacation and Moving Care
Vacation
If you choose to turn the Beverage Center off before you
leave, follow these steps.
1. Remove all contents from the Beverage Center.
2. Unplug the Beverage Center.
3. Clean the Beverage Center. See "Cleaning".
4. Tape a rubber or wood block to the top of the door to
prop it open far enough for air to get in. This stops odor
and mold from building up.
Moving
When you are moving your Beverage Center, follow these
steps to prepare it for the move.
1. Remove all contents from the Beverage Center.
2. Unplug the Beverage Center.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape
them together so they don't shift and rattle during the
move.
5. Tape the doors shut and tape the power cord to the
Beverage Center. When you get to your new home, put
everything back and refer to the "Installation
Instructions" section for preparation instructions.
Explosion Hazard
Risk of fire or explosion.
Flammable refrigerant used.
Do not use mechanical devices to defrost
Refrigerator.
Do not puncture refrigerant tubing.