Sauber EN60436 Manual Del Usuario página 72

Underneath existing work top
(When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (a).
Attention
After removing the work top, the screws must be screwed again under the rear edge
of the top (b).
Built-In Installation
Step 1. Selecting the best location for the dishwasher
The installation position of
hose and power socket.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1. Less than 5 mm between the top of dishwasher and cabinet and the outer door
aligned to cabinet.
the dishwasher should be near the existing inlet and drain
90 °
Electrical, drain Electrical, drain
and water supply and water supply
820mm 820mm
line line connection connection
580mm 580mm
Space between cabinet Space between cabinet
bottom and floor bottom and floor
600 mm (for 600 m model)
m
450 mm (for 450 mm model)
21
(for the integrated model)
90 °
80 80
100 100
a
a
b
b