Publicidad
Idiomas disponibles
Idiomas disponibles
Changing The Program Mid-cycle
A program can only be changed if it has been running only for a short period of
time, otherwise the detergent may have already been released or the the wash
water with detergent has already been drained. If this is the case, the dishwasher
needs to be reset and the detergent dispenser must be refilled.
dishwasher, follow the instructions below:
1. Open the door a little to stop the dishwasher, after the spray arm
you can open the door completely.
2. Press Program button more than three seconds the machine will be in
program selection
3. You can change the program to the desired cycle setting.
Forget To Add A Dish?
A forgotten dish can be added any time before the detergent dispenser opens. If
this is the case, follow the instructions below:
1. Press the Start/Pause button to pause the washing.
2. Wait 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5.
Press the Start/Pause button, the dishwasher will
After 5 sec
WARNING
mode.
3 sec
It is dangerous to open the door
mid-cycle, as hot steam may
scald you.
16
To reset the
stopped
continued to run
after 10s.
working,
Publicidad
