Publicidad
Idiomas disponibles
Idiomas disponibles
Standard Swivel Installation
The WatchIN detector package contains a standard swivel for flexible installation. Please follow
the instructions below for mounting the detector with the Standard Swivel:
1. Open WatchIN front cover (Unlock C1, Figure1).
2. Release internal base (Unlock I1, Figure2).
3. Open knockouts on external base (Figure 7, Detail B)
•
W1: Wires knockout
•
S1,S2: Knockouts for securing external base to Standard Swivel
•
S3: External base locking screw knockout
4. On the swivel accessory remove the required swivel cable wiring knockout S2, S7 or S9
(Figure 7, Detail A).
5. Remove back tamper from the internal base (see "Changing Back Tamper Position"
paragraph) and connect it to S5 (Figure 7, Detail A) on the Standard Swivel.
Note:
Ensure that you see the engraved UP mark on the upper front face of the swivel.
6. Select the mounting installation type as follows:
Wall Mounting
a. Insert external cable wiring through knockouts S2, S7 or S9 and extract them (including the
tamper wires) through the Swivel Wires Passage (Figure 7, Detail B).
b. Secure swivel to the wall through holes S1, S3, S6 and S8.
Note:
The CSMA is required when wall external wiring is used and protection pipe is required. The CSMA should
be ordered separately - P/N RA300SC0000A.
Swivel Conduit Mounting
Detail A)
CSMA
Ø
M1
M2
Tamper
Spring
M3
Holes
M4
a. Choose the direction upon which to mount the CSMA according to the required diameter:
16mm (0.63 inches) or 21mm (0.83 inches).
b. Insert conduit to the CSMA.
c. Secure CSMA to the wall through points (M1, M4).
d. Insert external cables and tamper wires from the conduit through the swivel wires passage
of the swivel (Figure 7, Detail A).
e. Secure swivel to the wall through holes S1, S3, S6 and S8.
8
All manuals and user guides at all-guides.com
(using optional Conduit Metal Swivel Adaptor – CSMA, Figure 7,
Detail A
Standard Swivel
S1 S2
mm
16
S9
S8
Ø
21 mm
Swivel Wires
S7 S6
Passage
Figure 7
WatchIN Installation Manual
S3
S1
S4
S5
Tamper
(see Detail C)
Detail B
Snaps
W1
S2
S3
Detail C
Publicidad
