WARNING!
RISK OF SCALDING. When steam first
starts coming out, do not press the
heating plates without straightening
your hair to prevent drops of boiling
water from coming out.
WARNING! Do not press the heating
plates
appliance switched off or in stand-by
to prevent water from coming out.
WARNING!
RISK OF SCALDING. During use, take
care not to place the straightener too
close to your face, ears, neck or scalp.
NOTE: For steam to start coming out, keep the appliance
horizontal when the selected temperature value stops flashing
on the LED display (3) and press the heating plates fully
down about 5 times. During this operation make sure
that the steam activation button (10) is fully pressed.
Thereafter, steam will come out every time the plates
are pressed.
1.
Take a thin, not large lock of hair between your fingers and place
it between the heating plates (1/2) starting from the roots.
2.
With one hand hold the lock taut and with the other slide the
straightener closed from the roots to the ends. The appliance is
fitted with a removable comb (11). If you want to use it, you are
advised to slide the straightener along your hair with the comb
facing downwards (FIG B3). If you want to remove it, slide it out
(FIG B.4).
3.
Repeat the same on every lock of hair.
4.
When all the locks are straight, turn the appliance off and unplug
it from the power socket.
5.
Let the appliance cool completely..
SILICONE MAT (13)
This has a dual function:
1.
Support base for the straightener while you are using it, to
protect surfaces.
multiple
17
times
with
EN
the