Schneider Airsystems MAS 650-10-90 D Manual De Instrucciones Original página 10

GB
MAS 650-10-90 D
Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Maintenance.............................
1.7 Compressor inspections .............
1.8 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the in-
struction manual!
1.4 Technical data
Suction capacity
Filling capacity
Voltage
Electric protection, delayed-action
Motor output
Max. operating speed
Compression final pressure
Switch-on pressure
Vessel capacity
Maximum permissible working overpressure of vessel
1
Oil quantity
L Sound power level according to DIN EN ISO 3744 (RL
WA
2000/14/EC)
L sound pressure level at a distance of 1 m
PA1
Voltage (service outlets)
Protection class
Max. surface load
Overall dimensions: width x depth x height
Weight
Max. number of switching cycles
Operation/Downtime ratio
Min. distance to wall
Ambient temperature
1.
Initial filling: mineral oil up to 10 °C. Under 10 °C, use fully synthetic oil.
I/4
Subject to technical modifications. Illustra-
tions may deviate from the original.
4
1.2 Scope of delivery
4
– Compressor with instruction manual
4
– Accessory pouch with oil drain hose
4
– Documents accompanying compressed air
5
vessel
5
– Socket spanner (for maintenance flaps)
5
– Hose rewinder with instruction manual
5
(optional)
1.3 Conventional use
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
650 l/min
400 l/min
400 V
16 A
4 kW
1240 rpm
10 bar
8 bar
90 l
11 bar
1,35 l
94 dB(A)
75 dB(A)
220/230 V
IP 44
50 kg
730 x 935 x 1260 mm
175,5 kg
10 1/h
60:40 --
40 cm
5-35 °C