Publicidad
Idiomas disponibles
Idiomas disponibles
washing a load of laundry
OVERVIEW OF THE CONTROL PANEL
1
2
Display
1
Select Cycle
2
Option
20_ washing a load of laundry
WA484DSHA-03050D_EN.indd Sec5:20
WA484DSHA-03050D_EN.indd Sec5:20
3
Provides instructions and diagnostics while keeping you updated on the cycle
status and time remaining.
Press these buttons to select diff erent cycle options.
Pure Cycle - Use to clean dirt and bacteria from the drum. Regular use (after
every 21 washes) is recommended. No detergent or bleach is needed (see
page 30).
Delay Start - Delay the start of any cycle for up to 24 hours in one-hour
increments. Displayed hour indicates the time the wash will be started.
Extra Spin - Add additional spin time to remove more water from loads.
Extra Rinse - Add an additional rinse at the end of the cycle to more
thoroughly remove laundry additives and perfumes.
Signal
- Press to turn the signal (chime) on or off .
My Cycle - Create and/or use a cycle you create with customized
temperature, spin, soil level, option, etc.
4
5
6
7
2012-07-02
2012-07-02
8
3:39:21
3:39:21
Publicidad
