GE JVM1631 Instrucciones De Instalación página 20

C3. ADAPTING BLOWER
FOR RECIRCULATION
NOTE: The exhaust adaptor with damper is not
needed for recirculating models. You may want to
save them for possible future use.
Remove and save screws that hold blower plate and
1
blower unit to the oven.
Blower Plate Screws
2 Slide the blower plate from under its retaining
flange and lift it off.
Retaining
Flange
Carefully pull out the blower unit. The wires
3
will extend far enough to allow you to adjust the
blower unit.
All manuals and user guides at all-guides.com
Installation Instructions
Blower Plate
Back of Oven
Blower Motor Screw
Blower Plate
4
Roll the blower unit 90° so that fan blade openings
are facing toward the front of the oven.
BEFORE: Fan Blade
Openings Facing Up
AFTER: Fan Blade
Openings Facing
Forward
20
Roll