Installing the TV to the Wall
Using the supplied Wall-Mount Bracket (KD-75XD9405, KD-65/55XD9305 only)
To Customers
Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony
dealers or licensed contractors and pay special attention to safety during the installation. Sony is not liable
for any damages or injury caused by mishandling or improper installation, or installing any other than the
specified product. Your Statutory Rights (if any) are not affected.
To Sony Dealers and Contractors
Sufficient expertise is required for installing this product. Be sure to read this instruction manual thoroughly
to do the installation work safely. Sony is not liable for any damages or injury caused by mishandling or
improper installation.
Note
• See page 3 (Safety information) and page 7 (Precautions) on WALL-MOUNT BRACKET before carrying out Wall-Mount
Bracket installation.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes
on the rear of the TV.
• Make sure that the wall has enough space for the TV and is capable of supporting a weight of at least four times that
of the TV. See page 24-26 (Specifications) for the TV's weight.
For instructions on Wall-Mount Bracket installation of your TV model, refer to the supplied Wall-Mount Bracket
Installation Guide.
GB
15
GB