Kenmore 385.15212 Manual De Instrucciones página 43

Ocultar thumbs Ver también para 385.15212:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Tension
is too loose
(_) Needle
thread
(Top thread)
(_) Bobbin
thread
(Bottom
thread)
(_) To tighten
(_ Right side (Top side) of fabric
@ Wrong
side (Bottom
side) of fabric
If the needle
thread
shows through
on the wrong
side
(Bottom
side)
of the fabric,
and the stitch feels bumpy, turn
the dial to a higher
tension
setting
number
to tighten
the
needle
thread
tension.
• Adjust
bobbin
tension
(_ Adjusting
screw
ncrease
tension
Decrease
tension
n some instances,
you may need
to adjust the bobbin
thread
tension.
Turn the adjusting
screw
_in
the direction
of @when
the
bobbin
thread
tension
s too tight.
Turn the adjusting
screw
_ in the direction
of
when the
bobbin
thread
tension
s too loose.
Adjust the Needle Thread Tension
for a Zigzag
Stitch
For an ideal zigza§
stitch,
the bobbin
thread
does not show
on the right side (Top side) of the fabric
and needle
thread
shews
slightly
on the wrong
side ,Bottom
side) of the
fabric.
See the illustrations
for correct
appearance.
To match
this appearance,
adJust the needle
tension.
• Correct
tension
(_) Right side (Top side) of fabric
(_) Wrong
side (Bottom
side) of fabric
Minimize
the amount
of needle
thread
visible
on the
wrong
side (Bottom
side) of the fabric
without
causing
excessive
puckering
or causing
bobbin
thread
to show
on
the right side (Top side) of the fabric.
Results
vary with fabric,
thread
and sewing
condition.
• Tension
is too tight
(_ Right side (Top side) of fabric
(_) Wrong
side (Bottom
side) of fabric
The corner
of each zigzag
pulls together
on the right side
(Top side) of fabric.
• Tension
is too loose
(_ Right side (Top side) of fabric
(_) Wrong
side (Bottom
side) of fabric
Corner
of each zigzag
pulls together
on the wrong
side
(Bottom
side) of fabric.
I"
_j
z/_
J
®
/
3O

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

385.15616385.15718

Tabla de contenido