Publicidad
Idiomas disponibles
Idiomas disponibles
4. INSTALLATION
4.1. LOCATION
■
When selecting a position for your unit, make sure the floor is flat and firm, and
the room is well ventilated.
■
Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also
avoid direct sunlight as it may increase the electrical consumption.
■
Extreme cold ambient temperatures may also cause the unit not to perform
properly.
■
This unit is not designed for use in a garage or outdoor installation.
■
Do not drape the unit with any covering.
■
When installing the unit, ensure that 10 cm of free space is left at both sides,
10 cm at the rear and 30 cm at the top of the unit. This will allow cold air to
circulate around the wine cooler and improve the efficiency of the cooling process.
4.2. REVERSING THE DOOR SWING (OPTIONAL)
Tools Required: Phillips screwdriver / Flat blade screwdriver / Hexagonal spanner
1.
Remove the top hinge cover.
2.
Remove the screws (fixing the top hinge) with a cross slot screwdriver.
Top hinge cover
Screw (3 pcs)
7
EN
Publicidad
