HCS EVSE User Manual
CHARGE CABLE WRAP GUIDELINES
The HCS enclosure body is sculpted to allow the charge cable to
be wrapped around it for convenient storage as well as to keep
the bulk of the cable off of the ground and out of the way. As the
charge cable is comprised of a number of wires, coiling the charge
cable too tightly around the enclosure will result in the charge
cable feeling warmer to the touch than would ordinarily be the
case.
To minimize this effect, it is recommended that the charge cable be
loosely draped around the enclosure body with larger loops. This
will also permit greater convenience in "pulling off" additional
loops if a longer charge cable reach is desired.
Figure 2: Drape the Charge Cable Loosely Around the
Enclosure
12