Westinghouse LCM-20V5 Manual Del Usuario página 10

Installation
1. Attaching the Base Stand to the LCD Monitor
Attach the base stand to the LCD monitor stand neck by aligning the holes and tabs.
Press in and snap the base into place. To remove the base stand, press the tabs on the
bottom of the stand neck and remove the base.
2.
Connect Video Cables to a Computer
Connect one of the following into the back of the LCD Monitor:
IMPORTANT: Before beginning,
turned off.
DVI-D CONNECTION:
Monitor DVI-D port.
VGA CONNECTION:
port to the LCD Monitor D-SUB port.
All manuals and user guides at all-guides.com
make sure the monitor and computer are
Connect a Digital DVI cable from your computer to the LCD
Connect an analog VGA cable from your computer VGA OUT
9