SOUNDMASTER SCD5100 Manual De Instrucciones página 10

Programmed Play
This can be used to program any desired sequence of tracks.
Up to 20 tracks can be programmed for disc play in any order.
Be sure to press the "STOP" button before use.
1. Press the "PROGRAM" button, the display will show "01" and flash.
2. Select desired track by using the "SKIP +" or "SKIP -" button.
3. Press the "PROGRAM" button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the "PLAY / PAUSE" button to play the disc in
the order you have programmed.
6. Press the "STOP" button twice to terminate programmed playback.
MODE
Press the "REPEAT" button before or during playing CD disc, each press switches the mode function as follows:
1 - REPEAT 1 (The repeat indicator is flashing.)
2 - REPEAT ALL (The repeat indicator is steadily on.)
3 - NORMAL PLAYBACK
Under "CD" or "RADIO" mode, if you want to play from AUX-IN jack, please connect the external device via 3.5 mm
plug jack to the AUX-IN jack. You can hear the sound from the external device through the loudspeakers and you
may adjust the volume on the external audio device. For further functions please refer to the user manual of the
external audio device.
NOTE:
Adjust the volume of the external device to a comfortable level.
To listen to music privately, use headphones with a 3.5 stereo jack plug and connect to the headphones socket on
the back of the system. The speakers will then be muted.
NOTE:
Adjust the volume of the external device to a comfortable level.
WARNING:
Do not immerse the device in water.

Always remove the mains plug before cleaning the machine.

Any marks on the surface can be wiped off with a slightly damp cloth without any additives.
If the unit is idle for 10 minutes, it will automatically switch to power saving mode.
Please resetting the FUNCTION" selector again.
Listening to an External Audio Source
Listening from the Headphone Jack
Cleaning and Maintenance
AUTOMATIC STANDBY SWITCHING
SCD5100 / English Instruction Manual
3