Publicidad
Idiomas disponibles
Idiomas disponibles
Telephone Helpline: 0845 146 2887
Operation
Insert plug in to suitable electrical socket and switch on.
The insects or pests are attracted in by the light from the lamp, when they come in to contact with
the Glue Board they become stuck to it and eventually expire. Never cover the Pest Killer, you can
stop flies etc. being attracted to it by switching off the power.
Cleaning, Care & Maintenance
Disconnect from power by removing the plug, wipe exterior surfaces and remove any loose
debris. When the Glue Board becomes covered with insects it will be necessary to replace it,
these are available from Eazyzap agents quote code AE778. Spare lamps are also available, code
P149
.
Trouble Shooting
Technical Specifications
Code
Voltage
GH096
240V/50Hz
Electrical Wiring
This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as
standard. The plug is to be connected to a suitable mains socket. The appliance is wired as follows:
•
Live wire (coloured brown) to terminal marked L
•
Neutral wire (coloured blue) to terminal marked N
•
Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit. If in doubt, consult a qualified
electrician. Electrical isolation points must be kept clear of any obstructions. In the event of any
emergency disconnection being required they must be readily accessible.
Power
Current
31W
0.25A
Dimensions mm
(H x D x W)
176 x 475 x 350
UK
Weight
4kg
Publicidad
