3 Maintenance and care
3.2 Cleaning / changing the motor protection filter
28
CAUTION:
Clean the motor protection filter upon every filter bag change, and at
least every 3 months. Change the motor protection filter every time you
open a new dust filter bag packet, because there is a new motor protec-
tion filter in every dust filter bag packet.
Change the motor protection filter at least every 6 months.
CAUTION:
The filter is washable, but it may not be cleaned in dishwashers or
washing machines. Also, do not use cleaning agents or brushes with
hard bristles. Leave the filter to dry after cleaning it with water
(approx. 24 hours at room temperature). Only put it back in place when
it is completely dry.
3.3 Cleaning / changing the exhaust filter
33
CAUTION:
Clean the exhaust filter each time you clean the motor protection filter.
Change the exhaust filter as soon as it has deformed or is damaged at
the latest.
CAUTION:
The filter is washable, but it may not be cleaned in dishwashers or
washing machines. Also, do not use cleaning agents or brushes with
hard bristles. Leave the filter to dry after cleaning it with water
(approx. 24 hours at room temperature). Only put it back in place when
it is completely dry.
3.4 Spare parts and accessories
The following accessories and spare parts can be reordered:
Item number
7700002
1 exhaust filter
7700022
4 dust filter bags + 1 motor protection filter
M203-4
1 parquet brush
M208-8
1 turbo brush
M219
1 mini-turbo brush "Fellino"
14
29
30
34
35
Description
31
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Take the dust filter bag out of the appliance (Fig. 28),
Chapter 3.1, 'Changing the dust filter bag'.
4. Pull the filter up and out of the filter holder (Fig. 29).
5. Rinse out the filter thoroughly with running cold or hand-warm water
(Fig. 30).
6. Leave the filter to dry (approx. 24 hours at room temperature).
7. Insert the filter back into the filter holder (Fig. 31).
8. Put the dust filter bag back in (Fig. 32),
Chapter 3.1, 'Changing the dust filter bag'.
36
1. Switch off the appliance ( ).
2. Pull the plug out of the plug socket.
3. Open the exhaust filter cover as shown (Fig. 33).
4. Take the filter out of the appliance (Fig. 34).
5. Rinse out the exhaust filter thoroughly under running water
(Fig. 35).
6. Then leave the exhaust filter to dry (approx. 24 hours at room temper-
ature).
7. Put the filter back into its holder (Fig. 36).
8. Put the exhaust filter cover into its recesses.
9. Push the cover until it locks into place (Fig. 37).
Accessory parts and spare parts can be reordered from:
Page 46, 'International Service'
CAUTION:
Only use original spare parts from the scope of delivery or those that
you have purchased by reordering.
32
click!
click!
37