Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
bp
FRONTPANELRELEASEKNOB
This knob is used to release the mechanism that
holds the front panel to the chassis. To detach the
front panel, press the button so that the left side of
the panel is released. Grasp the released side and
pull it off of the chassis. To re-attach the panel,
position the right side of the panel in place first and
then press the left side of the panel until the mecha-
nism locks it into place.
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when
attaching it to the chassis as it cannot be at-
tached when up-side down.
2. Do not press very hard on the front panel when
attaching it to the chassis. No more than light to
moderate pressure should be needed.
3. When attaching the front panel, make sure the
right side is correctly engaged before pressing
the left side to lock it into position.
DETACHING THE FRONT PANEL
Release Button
ATTACHING THE FRONT PANEL
-4-
Engage right
side first
Publicidad
