Hendi 209424 Manual Del Usuario página 6

Control Panel
Power supply line connection
EN
Attention: The power supply lines should be connected by authorized technician.
Operation
• Disconnect the power from the mains.
• Fill the container with oil or hydrogenated oil un-
til the MAX line.
Note! Solid fats must be preheated before filling,
this avoids burnt fat and overloading (See "Solid
Fat").
• Connect the internal wires of the power cord to a
suitable electrical supply outlet. (See --> power
supply line connection)
• Turn on the appliance by using the green on/off
button on the operating panel. The green lamp in
the switch will light.
6
L1 L2
Brown Black
Heating Temperature
indication lamp control
L3 N
Gray Blue
• Set the thermostat to the desired temperature.
The orange lamp will light.
• When the set temperature is reached, the orange
lamp goes out.
• During deep frying the temperature lamp will
light off and on to indicate that the heating ele-
ment will maintain its indicated temperature.
• You can now use the deep fryer.
NOTE: It is normal that the relais sounds the ON/
OFF sound during operation.
ON/OFF
switch
Earth
Green and yellow