Conceptronic ZEUS02E Manual Del Usuario página 6

English
Trouble shooting
Problem
The UPS does not
perform expected runtime
The UPS will not turn on
Outlets do not provide
power to equipment
Possible Cause
Batteries are not fully
charged.
The on/off switch is
designed to prevent
damage by rapidly
turning it off and on.
The unit is not connected
to an AC outlet.
Circuit breaker is tripped
due to overload
Batteries are discharged
Solution
Recharge the battery by
leaving the UPS plugged
in.
Turn the UPS off. Wait 10
seconds and then turn
the UPS on.
The unit must be
connected to a 230Vac
50/60Hz outlet.
Turn the UPS off and
unplug at least one piece
connected equipment.
Unplug the power cord of
the UPS then press the
circuit breaker knob.
Allow the unit to recharge
for at least 4 hours.